ChineseEnglish

Shaking table

1.Description of shaking table

Shaking table is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal , coal and other minerals. It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment. The product is made by the only manufacturer designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.

6-S Shaking Table(shaker table for gold) is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravities on the table, high quality of concentrates produced, convenient operation and adjustment and other features.

spiral concentrator surface is constructed of ore sand or slime and is made up of glass fibre reinforced plastic or aluminum alloy.

LS glass steel shaking tables are effective gravity separation equipment which can be used for different operation such as rough selection, elaborate selection and scavenging for large, medium and small-sized factories and applies to the sorting of nonferrous metal, ferrous metal, rare and precious metal, gold and nonmetallic ores of fine grains. Such shaking tablesare divided into ore sand tables and ore slime tables. Ore sand tables apply to the sorting of coarse ores and ore slime tables apply to the sorting of fine ores.

2.Drawing and structure of shaking table

 

3.technical parameters

4.Different type of shaking table

5. Our factory of shaking table
6. Delivery of our shaking table
 
7.Our clien of shaking table
 
 
 

 

 

Copyright © 1985-2080 www.shaking-table.com All Rights Reserved ”¤Jiangxi Shicheng Mine Machinery Factory Privacy Policy Terms and Conditions